( Specification:6mm x 4mm / 25 m )
Function description:From Manifold to Air Suspension
Function description:Water drain
Note:Use and handling for air tank:Turn on the drain valve one time for every month.
Function description:Using for Air Drain / Water Drain & Emergency Rescue
Remark:Please keep suitable length of air lines inside the car with you.This air lines can use in air drain and emergency rescue.
➤ Step of Emergency Rescue ( Open a link in a new tab )
Function description:Using for Air Drain / Water Drain & Emergency Rescue
Remark:Please keep suitable length of air lines inside the car with you.This air lines can use in air drain and emergency rescue.
➤ Step of Emergency Rescue ( Open a link in a new tab )
Function description:Please using controller to change the air flow rate first. If the air flow is in MAX (10 level) or Min (1 level) and can’t satisfy you require. Finial suggest is to adjust the flow rate valve in Manifold.
( The higher the knob: the faster the vehicle descends. / The lower the knob: the slower the vehicle descends. )
Note : After adjustment is completed. Make sure to secure the lower nut
( ◆ )
to avoid the knob move due to vibration.
Function description:Front Tank to Manifold
Function description:Front Tank to Manifold
Connected to Front-left ( air spring )
Connected to Front-right ( air spring )
Connected to Rear-left ( air spring )
Connected to Rear-right ( air spring )
The external drainage valve connected to internal copper pipe, and to the bottom of air tank to water drainage.
* Please close the valve completely after used.